Home › Engine / Hybrid System › M20A-FXS (ENGINE CONTROL) › AIR FUEL RATIO SENSOR (for Sensor 2) › from 2019.09
RM32K0E _51 Engine / Hybrid System _083960 M20A-FXS ENGINE CONTROL _0404844 AIR FUEL RATIO SENSOR(for Sensor 2) G

M20A-FXS ENGINE CONTROL  AIR FUEL RATIO SENSOR(for Sensor 2)  INSPECTION  


PROCEDURE

Hide 89467C 1.INSPECT AIR FUEL RATIO SENSOR

A352760C06
1.031,0.74 1.208,0.74 1.208,0.74 1.438,0.938 true 2.021,0.969 2.229,0.771 2.229,0.771 2.438,0.771 true 1.042,1.719 1.302,1.719 1.302,1.719 1.438,1.51 true 0.094,0.115 0.406,0.271 0.313,0.156 10 false *a 0.813,0.656 1.125,0.854 0.313,0.198 10 false +B 2.49,0.688 3.104,0.885 0.615,0.198 10 false HT1B 0.823,1.635 1.438,1.833 0.615,0.198 10 false E2
*a Component without harness connected
(Air Fuel Ratio Sensor)


a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HT1B) - 2 (+B) 20°C (68°F) 5 to 10 Ω
1 (HT1B) - 4 (E2) Always 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.