Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY (for Triple Beam Headlight) › from 2019.09
RM32K0E _59 Vehicle Exterior _061162 LIGHTING (EXT) _0406612 HEADLIGHT ASSEMBLY(for Triple Beam Headlight) A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY(for Triple Beam Headlight)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT BUMPER ASSEMBLY

Hide 85319A 2.SEPARATE INLET HOSE (for RH Side)

E436576

a.

Remove the clip to separate the inlet hose.


Hide 3.REMOVE HEADLIGHT ASSEMBLY

a.
E420060C01
0,0 0,0 false
V100155

Protective Tape


Apply protective tape around the headlight assembly as shown in the illustration.


b.
E426102C02
1.906,0.604 2.063,0.802 0.156,0.198 10 true A 1.052,2.021 1.208,2.219 0.156,0.198 10 true B 2.771,3.063 2.927,3.26 0.156,0.198 10 true B

Disconnect the 2 connectors B.


c.

w/ Side Marker Light:

i.

Disconnect the connector A.



d.
E420062

Remove the bolt and 3 screws.


e.
E420063C02
0,0 0,0 false
V113147

Remove in this Direction


Remove the headlight assembly as shown in the illustration.