Home › Vehicle Exterior › LIGHTING (EXT) › REAR FOG LIGHT ASSEMBLY › from 2019.09
RM32K0E _59 Vehicle Exterior _061162 LIGHTING (EXT) _0304264 REAR FOG LIGHT ASSEMBLY G

LIGHTING (EXT)  REAR FOG LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81220 1.INSPECT REAR FOG LIGHT ASSEMBLY (for LED Type)

a.

Check that the rear fog light assembly.

i.
E431534C02
0.979,1.802 1.396,1.385 true 2.479,1.771 2.01,1.396 true 0.344,0.26 0.656,0.458 0.313,0.198 10 false *a 0.865,1.802 1.208,2.052 0.344,0.25 10 false B 2.521,1.781 2.865,2.031 0.344,0.25 10 false E
*a Component without harness connected
(Rear Fog Light Assembly)


Apply auxiliary battery voltage to the rear fog light assembly and check that the light comes on.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 2 (B)
Auxiliary battery negative (-) → Terminal 1 (E)
Rear fog light comes on


If the result is not as specified, replace the rear fog light assembly.