1.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH
| *a | Component without harness connected
(Side Turn Signal Light Assembly LH) |
Apply auxiliary battery voltage to the side turn signal light LH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Terminal 2 |
Side turn signal light LH comes on |
If the result is not as specified, replace the side turn signal light assembly LH.
2.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH
| *a | Component without harness connected
(Side Turn Signal Light Assembly RH) |
Apply auxiliary battery voltage to the side turn signal light RH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Terminal 2 |
Side turn signal light RH comes on |
If the result is not as specified, replace the side turn signal light assembly RH.