Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type) › from 2019.09
RM32K0E _59 Vehicle Exterior _061162 LIGHTING (EXT) _0304269 REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type) A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type)  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 81555H 1.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE (for LED Type Stop Light)

a.
E368062

Connect the connector.


b.

Engage the clamp to install the rear combination light socket and wire.


Hide 81555H 2.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE (for Bulb Type Stop Light)

a.
E420093

Connect the 2 connectors.


b.

Engage the clamp to install the rear combination light socket and wire.


Hide 81550S 3.INSTALL REAR SIDE MARKER LIGHT BULB (for Bulb Type Stop Light)

a.
E368061C01
0,0 0,0 false
V113147

Install in this Direction


Install the rear side marker light bulb to the rear combination light socket and wire as shown in the illustration.


b.
E426109C01
0,0 0,0 false
V113147

Install in this Direction


Turn the rear combination light socket and wire with the rear side marker light bulb as shown in the illustration to connect them as a unit.


Hide 4.INSTALL STOP LIGHT BULB (for Bulb Type Stop Light)

a.
E420091C01
0,0 0,0 false
V113147

Install in this Direction


Install the stop light bulb to the rear combination light socket and wire as shown in the illustration.


b.
E420092C01
0,0 0,0 false
V113147

Install in this Direction


Turn the rear combination light socket and wire with the stop light bulb as shown in the illustration to connect them as a unit.


Hide 81550L 5.INSTALL REAR TURN SIGNAL LIGHT BULB

a.
E358048C02
0,0 0,0 false
V113147

Install in this Direction


Install the rear turn signal light bulb to the rear combination light socket and wire as shown in the illustration.


b.
E426110C01
0,0 0,0 false
V113147

Install in this Direction


Turn the rear combination light socket and wire with the rear turn signal light bulb as shown in the illustration to connect them as a unit.


Hide 81536A 6.INSTALL REAR COMBINATION LIGHT LED (for LED Type Stop Light)

a.
E426111C01
0,0 0,0 false
V113147

Install in this Direction


Turn the rear combination light LED as shown in the illustration to install it.


b.

Install the screw.


c.

Connect the connector.