81590A
1.INSPECT REAR LIGHT ASSEMBLY LH
| *a | Component without Harness Connected
(Rear Light Assembly LH) |
Check that the rear light assembly LH.
Apply auxiliary battery voltage to the rear light assembly LH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 1 (TRN), Terminal 6 (TRN)
Auxiliary battery negative (-) → Terminal 2 (E) |
Turn signal light comes on |
The turn signal light will not have sequential effect when checking by this method.
If the result is not as specified, replace the rear light assembly LH.
Apply auxiliary battery voltage to the rear light assembly LH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 3 (TL)
Auxiliary battery negative (-) → Terminal 2 (E) |
Taillight comes on |
If the result is not as specified, replace the rear light assembly LH.
81580D
2.INSPECT REAR LIGHT ASSEMBLY RH
| *a | Component without Harness Connected
(Rear Light Assembly RH) |
Check that the rear light assembly RH.
Apply auxiliary battery voltage to the rear light assembly RH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 1 (TRN), Terminal 6 (TRN)
Auxiliary battery negative (-) → Terminal 2 (E) |
Turn signal light comes on |
The turn signal light will not have sequential effect when checking by this method.
If the result is not as specified, replace the rear light assembly RH.
Apply auxiliary battery voltage to the rear light assembly RH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 3 (TL)
Auxiliary battery negative (-) → Terminal 2 (E) |
Taillight comes on |
If the result is not as specified, replace the rear light assembly RH.