1.REMOVE BACK-UP LIGHT ASSEMBLY (w/o Rear Fog Light)
Disengage the clamp and disconnect the connector.
Remove the 2 screws.
Disengage the guides to remove the back-up light assembly.
2.REMOVE BACK-UP LIGHT ASSEMBLY (w/ Rear Fog Light)
Disengage the clamp and disconnect the 2 connectors.
for 2ZR-FXE:
Remove the 2 screws.
Disengage the guides to remove the back-up light assembly.
for M20A-FXS:
Remove the 2 screws.
Disengage the guides to remove the back-up light assembly.