1.INSTALL BACK-UP LIGHT ASSEMBLY (w/o Rear Fog Light)
Engage the guides to install the back-up light assembly.
Install the 2 screws.
Connect the connector and engage the clamp.
2.INSTALL BACK-UP LIGHT ASSEMBLY (w/ Rear Fog Light)
for 2ZR-FXE:
Engage the guides to install the back-up light assembly.
Install the 2 screws.
for M20A-FXS:
Engage the guides to install the back-up light assembly.
Install the 2 screws.
Connect the 2 connectors and engage the clamp.