76827A
1.INSTALL NO. 2 BACK DOOR GARNISH RETAINER (w/o Rear View Monitor System)
|
Install in this Direction |
Engage the claws to install the No. 2 back door garnish retainer as shown in the illustration.
2.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY (for Type A)
Remove the release paper from the back door outside garnish seal.
|
Install in this Direction |
Engage the clips to install the back door outside garnish sub-assembly as shown in the illustration.
Install the 4 bolts.
3.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY (for Type B)
Remove the release paper from the back door outside garnish seal.
|
Install in this Direction |
Engage the clips and guides to install the back door outside garnish sub-assembly as shown in the illustration.
Install the 4 bolts.
81962
4.INSTALL REAR LIGHT COVER LH (for Type B)
Engage the guides to install the rear light cover LH.
Install the clip.
81952A
5.INSTALL REAR LIGHT COVER RH (for Type B)
Use the same procedure as for the LH side.
64780A
6.INSTALL BACK DOOR TRIM PANEL ASSEMBLY
67938A
7.INSTALL BACK DOOR SIDE GARNISH LH
67937B
8.INSTALL BACK DOOR SIDE GARNISH RH
Use the same procedure as for the LH side.
64790B
9.INSTALL BACK DOOR TRIM UPPER PANEL ASSEMBLY
64910J
10.INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
64330D
11.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)