Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM › from 2019.09
RM32K0E _51 Engine / Hybrid System _061336 CRUISE CONTROL _0304569 CRUISE CONTROL SYSTEM U

CRUISE CONTROL  CRUISE CONTROL SYSTEM  TERMINALS OF ECU  


CHECK HYBRID VEHICLE CONTROL ECU (for 2ZR-FXE)


C297329E13
1.344,1.458 1.844,1.708 0.5,0.25 2.667,1.469 3.167,1.719 0.5,0.25 4.198,1.469 4.698,1.719 0.5,0.25 5.469,1.458 5.969,1.708 0.5,0.25 1.469,1.5 1.823,1.656 0.354,0.156 10 false A49 2.802,1.5 3.177,1.698 0.375,0.198 10 false A48 4.365,1.51 4.865,1.698 0.5,0.188 10 false F2 5.635,1.51 6.042,1.677 0.406,0.167 10 false F3

HINT:

The standard voltage, resistance and waveform between each pair of the hybrid vehicle control ECU terminals is shown in the table below. The appropriate conditions for checking each pair of the terminals is also indicated. The result of checks should be compared with the standard voltage, resistance and waveform for each pair of the terminals as displayed in the Specified Condition column. The illustration above can be used as a reference to identify the hybrid vehicle control ECU terminal locations.


Terminal No. (Symbols) Wiring Color Terminal Description Condition Specified Condition
A48-26 (DB1) - F3-4 (E12) W - W-B Shift lever position signal Power switch on (IG), shift lever in D or B 11 to 14 V
Power switch on (IG), shift lever not in D or B Below 1 V
A48-14 (DB2) - F3-4 (E12) G - W-B Shift lever position signal Power switch on (IG), shift lever in D or B 11 to 14 V
Power switch on (IG), shift lever not in D or B Below 1 V
A49-15 (STP) - F3-4 (E12) SB - W-B Stop light signal Brake pedal depressed 11 to 14 V
Brake pedal released Below 1 V
F3-3 (BATT) - F3-4 (E12) B - W-B Constant power source Power switch off 11 to 14 V
F2-28 (CCS) - F3-4 (E12) R - W-B Cruise control main switch circuit Cruise control main switch off 10 MΩ or higher
Cruise control main switch on Below 1.5 Ω
+RES switch ON 235 to 245 Ω
-SET switch ON 617 to 643 Ω
CANCEL switch ON 1509 to 1571 Ω
A48-28 (ST1-) - F3-4 (E12) R - W-B Stop light signal Power switch on (IG), brake pedal depressed Below 1 V
Power switch on (IG), brake pedal released 11 to 14 V
F3-4 (E12) - Body ground W-B - Body ground Ground Always Below 1 Ω


CHECK HYBRID VEHICLE CONTROL ECU (for M20A-FXS)


A364981E07
1.083,0.75 1.583,1 0.5,0.25 3.167,0.75 3.667,1 0.5,0.25 5.333,0.75 5.833,1 0.5,0.25 1.208,0.802 1.667,1 0.458,0.198 10 false A97 5.427,0.802 5.885,1 0.458,0.198 10 false F161 3.25,0.802 3.708,1 0.458,0.198 10 false F160

HINT:

The standard voltage, resistance and waveform between each pair of the hybrid vehicle control ECU terminals is shown in the table below. The appropriate conditions for checking each pair of the terminals is also indicated. The result of checks should be compared with the standard voltage, resistance and waveform for each pair of the terminals as displayed in the Specified Condition column. The illustration above can be used as a reference to identify the hybrid vehicle control ECU terminal locations.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A97-3 (DB1) - F160-34 (E12) W - W-B Shift lever position signal Power switch on (IG), shift lever in D or S 7.5 to 14 V
Power switch on (IG), shift lever not in D or S 0 to 1.5 V
A97-15 (DB2) - F160-34 (E12) G - W-B Shift lever position signal Power switch on (IG), shift lever in D or S 7.5 to 14 V
Power switch on (IG), shift lever not in D or S 0 to 1.5 V
A97-7 (STP) - F160-34 (E12) SB - W-B Stop light switch signal Brake pedal depressed 11 to 14 V
Brake pedal released 0 to 1.5 V
F161-27 (BATT) - F160-34 (E12) B - W-B*1
Y - W-B*2
Constant power source Power switch off 11 to 14 V
F160-28 (ST1-) - F160-34 (E12) R - W-B Stop light switch signal Power switch on (IG), brake pedal depressed 0 to 1.5 V
Power switch on (IG), brake pedal released 11 to 14 V
F161-14 (CCS) - F160-34 (E12) SB - W-B Cruise control main switch circuit Cruise control main switch off 10 MΩ or higher
Cruise control main switch on Below 1.5 Ω
+RES switch ON 235 to 245 Ω
-SET switch ON 617 to 643 Ω
CANCEL switch ON 1509 to 1571 Ω
F160-34 (E12) - Body ground W-B - Body ground Ground Always Below 1 Ω

*1: for RHD

*2: for LHD