86750A
1.INSTALL MAYDAY SWITCH ASSEMBLY (w/ Manual (SOS) Switch)
81260A
2.INSTALL MAP LIGHT ASSEMBLY
Connect each connector.
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Engage the guide and clips to install the map light assembly as shown in the illustration.
81260C
3.INSTALL MAP LIGHT BULB
81265C
4.INSTALL NO. 1 MAP LIGHT LENS
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Engage the guide and claws to install the No. 1 map light lens as shown in the illustration.