Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TELEVISION CAMERA (for Front) › from 2019.09
RM32K0E _56 Audio / Visual / Telematics _060599 PARK ASSIST / MONITORING _0408361 TELEVISION CAMERA(for Front) A

PARK ASSIST / MONITORING  TELEVISION CAMERA(for Front)  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during front television camera assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
·

Removal/installation of the front television camera assembly

·

Replacement of the front television camera assembly


Front television camera view adjustment Panoramic view monitor system (Click here)

PROCEDURE

Hide 2.REMOVE FRONT BUMPER ASSEMBLY

Hide 86790B 3.REMOVE FRONT TELEVISION CAMERA ASSEMBLY

a.
E426509

Disconnect the connector.


b.
E426510

Remove the 2 screws.


c.

Disengage the guides to remove the front television camera assembly.