Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TELEVISION CAMERA (for Rear) › from 2019.09
RM32K0E _56 Audio / Visual / Telematics _060599 PARK ASSIST / MONITORING _0408364 TELEVISION CAMERA(for Rear) A

PARK ASSIST / MONITORING  TELEVISION CAMERA(for Rear)  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the rear television camera assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedures Effects/Inoperative Functions when not Performed Link
·

Removal/installation of the rear television camera assembly

·

Replacement of the rear television camera assembly


Television camera view adjustment Panoramic view monitor system (Click here)

PROCEDURE

Hide 76811 2.REMOVE BACK DOOR OUTSIDE GARNISH

Hide 86790D 3.REMOVE REAR TELEVISION CAMERA ASSEMBLY

a.
E357001

Disconnect the connector.


b.

Remove the nut.


c.
E357002C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws and guide to remove the rear television camera assembly as shown in the illustration.