72020
1.INSPECT FRONT SEAT ADJUSTER ASSEMBLY
| *a | Component without harness connected
(Slide Motor (Front Seat Adjuster Assembly)) |
Check the operation of the slide motor.
Check that the seat cushion moves smoothly when the battery is connected to the slide motor connector terminals.
| Battery Connection | Operational Direction |
|---|---|
| Auxiliary battery positive (+) → Terminal 2
Auxiliary battery negative (-) → Terminal 1 |
Seat cushion moves forward |
| Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Terminal 2 |
Seat cushion moves backward |
If the result is not as specified, replace the front seat adjuster assembly.
85822B
2.INSPECT POWER SEAT TILT MOTOR ASSEMBLY
| *a | Component without harness connected
(Power Seat Tilt Motor Assembly) |
Check the operation of the power seat tilt motor assembly.
Check that the seat cushion moves smoothly when the battery is connected to the power seat tilt motor assembly connector terminals.
| Battery Connection | Operational Direction |
|---|---|
| Auxiliary battery positive (+) → Terminal 2
Auxiliary battery negative (-) → Terminal 1 |
Seat cushion moves downward |
| Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Terminal 2 |
Seat cushion moves upward |
If the result is not as specified, replace the power seat tilt motor assembly.
85822C
3.INSPECT POWER SEAT LIFTER MOTOR ASSEMBLY
| *a | Component without harness connected
(Power Seat Lifter Motor Assembly) |
Check the operation of the power seat lifter motor assembly.
Check that the seat cushion moves smoothly when the battery is connected to the power seat lifter motor assembly connector terminals.
| Battery Connection | Operational Direction |
|---|---|
| Auxiliary battery positive (+) → Terminal 2
Auxiliary battery negative (-) → Terminal 1 |
Seat cushion moves downward |
| Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Terminal 2 |
Seat cushion moves upward |
If the result is not as specified, replace the power seat lifter motor assembly.
71014S
4.INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY
| *a | Component without harness connected
(Reclining Motor (Front Seatback Frame Sub-assembly)) |
Check the operation of the reclining motor.
Check that the seatback moves smoothly when the battery is connected to the reclining motor connector terminals.
| Battery Connection | Operational Direction |
|---|---|
| Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Terminal 4 |
Seatback moves forward |
| Auxiliary battery positive (+) → Terminal 4
Auxiliary battery negative (-) → Terminal 1 |
Seatback moves backward |
If the result is not as specified, replace the front seatback frame sub-assembly.