Home › Vehicle Interior › SEAT › FRONT SEAT CUSHION HEATER (for Power Seat) › from 2019.09
RM32K0E _58 Vehicle Interior _061825 SEAT _0409036 FRONT SEAT CUSHION HEATER(for Power Seat) G

SEAT  FRONT SEAT CUSHION HEATER(for Power Seat)  INSPECTION  


PROCEDURE

Hide 87510L 1.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY

a.

Check the resistance.

i.
B460292C01
1.583,1.833 1.917,2.083 0.333,0.25 1.552,0.26 1.885,0.51 0.333,0.25 0.188,0.219 0.5,0.417 0.313,0.198 10 false *a 1.667,0.302 1.979,0.5 0.313,0.198 10 false A 1.698,1.885 2.01,2.083 0.313,0.198 10 false B
*a Component without harness connected
(Front Seat Cushion Heater Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-4 - A-5 Seat heater temperature 25°C (77°F) 4.93 to 5.07 kΩ
B-1 - B-2 Seat heater temperature 20°C (68°F) 2.99 to 3.59 Ω
A-2 - A-6 - B-2 Always Below 1 Ω


If the result is not as specified, replace the front seat cushion heater assembly.