Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PANORAMIC VIEW MONITOR SYSTEM › from 2019.09
RM32K0E _56 Audio / Visual / Telematics _060599 PARK ASSIST / MONITORING _0410446 PANORAMIC VIEW MONITOR SYSTEM D

PARK ASSIST / MONITORING  PANORAMIC VIEW MONITOR SYSTEM  DTC CHECK / CLEAR  


CHECK DTC


a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Chassis / Circumference Monitoring Camera Control Module / Trouble Codes.


e.

Check the details of the DTCs.

Chassis > Circumference Monitoring Camera Control Module > Trouble Codes
50001 353


CLEAR DTC


a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Chassis / Circumference Monitoring Camera Control Module / Clear DTCs.


e.

According to the display on the GTS, select the trouble code data display with the clear button.

Chassis > Circumference Monitoring Camera Control Module > Clear DTCs
50002 353