Home › Power Source / Network › 2ZR-FXE (BATTERY / CHARGING) › CHARGING SYSTEM › from 2019.09
RM32K0E _57 Power Source / Network _060220 2ZR-FXE BATTERY / CHARGING _0295712 CHARGING SYSTEM D

2ZR-FXE BATTERY / CHARGING  CHARGING SYSTEM  DTC CHECK / CLEAR  


CHECK FOR DTCS


a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

Powertrain > Hybrid Control > Trouble Codes
50001 397

e.

Check the DTCs and freeze frame data, and then write them down.


f.

Check the details of the DTCs.

HINT:
GTS Display Description
Test Failed Shows the malfunction judgment results during the current trip.
Pending Shows the malfunction judgment results up to now. (Indicates the possibility of a malfunction when no DTC is confirmed.)
Confirmed Shows the DTCs confirmed up to now. (The number of current trips differs for each DTC.)




CHECK FREEZE FRAME DATA


a.

If a DTC is stored, select it in order to display its freeze frame data.


b.

Read the freeze frame data recorded when the DTC was stored.



CLEAR DTCS


NOTICE:

Clearing the DTCs will also clear the freeze frame data.



a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.


e.

Clear the DTCs and freeze frame data.

Powertrain > Hybrid Control > Clear DTCs
50002 236