Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM › from 2019.09
RM32K0E _59 Vehicle Exterior _061162 LIGHTING (EXT) _0303092 AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM D

LIGHTING (EXT)  AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM  SYSTEM DESCRIPTION  


AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL


a.

General

The automatic headlight beam level control system ensures forward visibility and prevents dazzling of drivers in oncoming and preceding vehicles by controlling the headlight beam level vertically when the weight of passengers and loads has caused the vehicle attitude to change.

HINT:

The angle of the low beam headlights is adjusted up or down when the vehicle posture changes while accelerating or decelerating.



b.

Function of Main Components

Component Outline
Headlight ECU Sub-assembly Receives various signals, calculates changes in the vehicle posture, and actuates the headlight leveling motor.
Healight Unit Assembly (Headlight Swivel and Leveling Motor) Based on the signals received from the headlight ECU sub-assembly LH or RH, the motors move the reflectors in the headlight to change the low beam angle.
Rear Height Control Sensor Sub-assembly LH Transmits a height control sensor signal to the headlight ECU sub-assembly LH.
Brake Booster with Master Cylinder Assembly (Skid Control ECU) Transmits a speed sensor signal to the headlight ECU sub-assembly LH.
Hybrid Vehicle Control ECU Transmits a READY ON status signal to the headlight ECU sub-assembly LH.
Main Body ECU (Multiplex Network Body ECU) Transmits a headlight status signal to the headlight ECU sub-assembly LH.
Combination Meter Assembly If the system malfunctions, "Headlight System Malfunction Visit Your Dealer" warning message will be displayed on the multi-information display in the combination meter assembly in accordance with the signal from the headlight ECU sub-assembly LH.


c.

Initial Set Control

When the engine is started, the headlight ECU sub-assembly LH drives the headlight leveling motor and moves the headlight reflector to the lower limit position and returns it to the proper position. The headlight ECU sub-assembly LH thus assesses the position of the headlight for reference control.