Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM (w/o Headlight ECU) › from 2019.09
RM32K0E _59 Vehicle Exterior _061162 LIGHTING (EXT) _0408677 LIGHTING SYSTEM(w/o Headlight ECU) U

LIGHTING (EXT)  LIGHTING SYSTEM(w/o Headlight ECU)  TERMINALS OF ECU  


CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)


B434105C68
2.146,3.104 2.542,3.344 0.396,0.24 4.604,3.083 5,3.323 0.396,0.24 1.396,4.573 1.792,4.813 0.396,0.24 3.729,4.583 4.125,4.823 0.396,0.24 5.292,4.615 5.688,4.854 0.396,0.24 6.292,4.625 6.688,4.865 0.396,0.24 4.646,6.229 5.042,6.469 0.396,0.24 1.51,6.208 1.906,6.448 0.396,0.24 3.417,7.844 3.813,8.083 0.396,0.24 1.667,1.479 1.906,1.479 true 1.667,1.802 1.906,1.802 true 1.438,2.792 1.438,1.469 1.438,1.469 1.552,1.469 true 1.438,1.802 1.552,1.802 true 4.031,0.792 4.156,0.219 true 1.594,0.646 1.719,0.24 true 1.969,1.406 2.281,1.604 0.313,0.198 10 false F15 4.219,0.135 4.531,0.333 0.313,0.198 10 false MB 0.875,1.115 1.188,1.313 0.313,0.198 10 false 3H 0.885,1.656 1.198,1.854 0.313,0.198 10 false 3F 0.885,2.031 1.198,2.229 0.313,0.198 10 false 3L 0.896,2.25 1.208,2.448 0.313,0.198 10 false 3K 1.969,1.708 2.281,1.906 0.313,0.198 10 false F16 5.854,1.135 6.167,1.333 0.313,0.198 10 false 3D 5.854,1.781 6.167,1.979 0.313,0.198 10 false 3A 4.698,3.125 5.01,3.323 0.313,0.198 10 false F15 2.219,3.146 2.531,3.344 0.313,0.198 10 false F16 1.521,4.615 1.833,4.813 0.313,0.198 10 false 3H 3.865,4.625 4.177,4.823 0.313,0.198 10 false 3F 5.417,4.667 5.729,4.865 0.313,0.198 10 false 3L 6.406,4.677 6.719,4.875 0.313,0.198 10 false 3K 1.625,6.26 1.938,6.458 0.313,0.198 10 false 3D 4.771,6.281 5.083,6.479 0.313,0.198 10 false 3A 3.531,7.896 3.844,8.094 0.313,0.198 10 false MB 0.125,0.135 0.615,0.375 0.49,0.24 12 false *A 1.771,0.125 2.677,0.323 0.906,0.198 10 false *1 1.365,2.833 2.271,3.031 0.906,0.198 10 false *a
*A Main Body ECU (Multiplex Network Body ECU) with 2 Connectors - -
*1 Main Body ECU (Multiplex Network Body ECU) - -
*a 2 Connectors - -


B434104C56
3.531,3.198 3.896,3.417 0.365,0.219 1.396,4.583 1.76,4.802 0.365,0.219 3.729,4.583 4.094,4.802 0.365,0.219 5.313,4.583 5.677,4.802 0.365,0.219 6.302,4.552 6.667,4.771 0.365,0.219 1.583,6.24 1.948,6.458 0.365,0.219 4.813,6.26 5.177,6.479 0.365,0.219 3.354,7.854 3.719,8.073 0.365,0.219 1.667,1.333 1.906,1.333 true 1.417,2.708 1.417,1.333 1.417,1.333 1.542,1.333 true 1.615,0.646 1.74,0.208 true 3.99,0.802 4.146,0.24 true 0.865,1.094 1.177,1.292 0.313,0.198 10 false 3H 0.865,1.646 1.177,1.844 0.313,0.198 10 false 3F 0.875,2.01 1.188,2.208 0.313,0.198 10 false 3L 0.885,2.24 1.198,2.438 0.313,0.198 10 false 3K 1.969,1.26 2.281,1.458 0.313,0.198 10 false F15 4.188,0.125 4.5,0.323 0.313,0.198 10 false MB 5.844,1.104 6.156,1.302 0.313,0.198 10 false 3D 5.844,1.76 6.156,1.958 0.313,0.198 10 false 3A 3.604,3.219 3.917,3.417 0.313,0.198 10 false F15 1.5,4.604 1.813,4.802 0.313,0.198 10 false 3H 3.823,4.604 4.135,4.802 0.313,0.198 10 false 3F 5.427,4.604 5.74,4.802 0.313,0.198 10 false 3L 6.396,4.583 6.708,4.781 0.313,0.198 10 false 3K 1.688,6.26 2,6.458 0.313,0.198 10 false 3D 4.917,6.292 5.229,6.49 0.313,0.198 10 false 3A 3.438,7.875 3.75,8.073 0.313,0.198 10 false MB 0.167,0.115 0.531,0.396 0.365,0.281 12 false *A 1.813,0.115 3,0.49 1.188,0.375 10 false *1 1.344,2.75 2.531,3.125 1.188,0.375 10 false *a
*A Main Body ECU (Multiplex Network Body ECU) with 1 Connector - -
*1 Main Body ECU (Multiplex Network Body ECU) - -
*a 1 Connector - -


a.

Disconnect the instrument panel junction block assembly and main body ECU (multiplex network body ECU) connectors.


b.

Measure the voltage on the wire harness side connector according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
3F-1 - Body ground W - Body ground Battery power supply Always 11 to 14 V
3K-1 - Body ground B-R - Body ground Battery power supply Always 11 to 14 V

If the result is not as specified, there may be a malfunction in the wire harness.


c.

Measure the resistance on the wire harness side connector according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
3D-3 - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction in the wire harness.


d.

Reconnect the instrument panel junction block assembly and main body ECU (multiplex network body ECU) connectors.


e.

Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
3H-30 - Body ground G - Body ground Taillights and license plate lights drive output Light control switch in tail or head position 11 to 14 V
Light control switch off*1 Below 1 V
3A-52 - Body ground*2 L - Body ground Front fog light drive output Light control switch in tail or head position, fog light switch in front position Below 1 V
Light control switch in tail or head position, fog light switch off 11 to 14 V
3H-21 - Body ground*4 BE - Body ground Rear fog light drive output Light control switch in tail or head position, fog light switch in rear position 11 to 14 V
Light control switch in tail or head position, fog light switch off Below 1 V
3F-31 - Body ground G - Body ground H-LP LH relay drive output Power switch off 11 to 14 V
Power switch ON Below 1 V
F15-1 (DIM) - Body ground Y - Body ground H-LP RH relay drive output Power switch off 11 to 14 V
Power switch ON Below 1 V
F15-8 (A) - Body ground W - Body ground Light control switch AUTO position signal input Light control switch in AUTO position Below 1 V
Light control switch not in AUTO position Pulse generation
F15-10 (HF) - Body ground LG - Body ground Dimmer switch high flash position signal input Dimmer switch in high flash position Below 1 V
Dimmer switch not in high flash position Pulse generation
F15-12 (HEAD) - Body ground L - Body ground Light control switch head position input Light control switch in head position Below 1 V
Light control switch not in head position Pulse generation
F15-19 (CLTB) - F15-21 (CLTE) G - V Automatic light control sensor power supply output Power switch off Below 1 V
11 to 14 V
F15-20 (CLTS) - Body ground BE - Body ground Automatic light control sensor signal input Power switch off Below 1 V
Automatic light control system operating Communication waveform generation
(See waveform 1)
F15-22 (TAIL) - Body ground Y - Body ground Light control switch tail position signal input Light control switch in tail or head position Below 1 V
Light control switch not in tail or head position Pulse generation
F15-23 (RFOG) - Body ground*4 W - Body ground Fog light switch rear position input Fog light switch in rear position Below 1 V
Fog light switch off Pulse generation
F15-24 (HU) - Body ground GR - Body ground Dimmer switch high position signal input Dimmer switch in high position Below 1 V
Dimmer switch not in high position Pulse generation
F15-26 (FFOG) - Body ground*2 R - Body ground Fog light switch front position input Fog light switch in front position Below 1 V
Fog light switch off Pulse generation
F16-4 (MILE) - Body ground*3 R - Body ground Door mirror foot lights drive output Door mirror foot light illuminates 11 to 14 V
Door mirror foot light off Below 3 V

*1: If the light switch has no OFF position, set the light switch to "Auto" with the Lo beam turned off. If the Lo beam is illuminated, shine a fluorescent light or other light source onto the light sensor to enter daytime mode.

*2: w/ Front Fog Light

*3: w/ Door Mirror Foot Light

*4: w/ Rear Fog Light


If the result is not as specified, the main body ECU (multiplex network body ECU) or instrument panel junction block assembly may be malfunctioning.

i.
E276298N01
2.844,1.646 3.219,1.813 0.375,0.167 10 false GND

Waveform 1

Item Content
Tester Connection F15-20 (CLTS) - Body ground
Tool setting 2 V/DIV., 10 ms./DIV.
Condition Power switch ON

HINT:

The communication waveform changes according to the surrounding brightness.