Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM (w/o Headlight ECU) › from 2019.09
RM32K0E _59 Vehicle Exterior _061162 LIGHTING (EXT) _0408677 LIGHTING SYSTEM(w/o Headlight ECU) U

LIGHTING (EXT)  LIGHTING SYSTEM(w/o Headlight ECU)  FAIL-SAFE CHART  


FAIL-SAFE FUNCTION



The light control LED ECU operates in fail-safe mode if any of the following abnormalities are detected.

Item Abnormality Detection Condition Return Condition Multi-information Display
Abnormal output
(Open or Short)
Abnormal LED driver module output voltage is detected. When open circuit occured:
·

Voltage of 24.5 V or less is detected.


When short circuit occured:
·

Voltage of 6.0 V or more is detected.


"Headlight System Malfunction Visit Your Dealer." is displayed
Abnormal input voltage
(Low input voltage)*
Abnormally low LED driver power supply voltage (6 V or less) is detected. Normal power source voltage (10 to 16 V) is detected. "Headlight System Malfunction Visit Your Dealer." is displayed

*: When the headlights are on and the input voltage is between 6 and 10 V, the headlights dim.


AUTOMATIC LIGHT CONTROL SYSTEM


If the main body ECU (multiplex network body ECU) detects a malfunction in the automatic light control sensor, the main body ECU (multiplex network body ECU) performs fail-safe control to prohibit the automatic light control. If the low beam headlights and taillights are on, the lights will remain on until the light control switch is turned off.