Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR DOOR OUTSIDE MOULDING › 2020.08–2020.12
RM32K0E _59 Vehicle Exterior _061792 EXTERIOR PANELS / TRIM _0304185 REAR DOOR OUTSIDE MOULDING A

EXTERIOR PANELS / TRIM  REAR DOOR OUTSIDE MOULDING  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 75743A 1.INSTALL REAR DOOR UPPER REAR OUTSIDE MOULDING (w/ Plated Moulding)

a.

When using a new rear door outside moulding:

i.

Clean the surface of the rear door outside moulding.



b.

When reusing the rear door outside moulding:

i.

Remove the double-sided tape from the rear door outside moulding.


ii.

Wipe off any tape adhesive residue with cleaner.



c.

Install a new rear door upper rear outside moulding.

i.

Remove the release paper from the rear door upper rear outside moulding.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



ii.
B587974C01
2.771,0.656 3.146,0.396 true 0.698,0.823 0.844,0.635 false 3.198,0.281 3.396,0.49 0.198,0.208 10 false *a 0.563,0.844 0.875,1 0.313,0.156 10 false *b 2.427,0.354 2.646,0.542 0.219,0.188 10 true *c 0.865,0.281 1.094,0.438 0.229,0.156 10 false *d
*a Mark-off Line
*b Rear Door Outside Moulding Edge
*c 2.2 mm (0.087 in.)
*d 1.0 mm (0.039 in.)


Install the rear door upper rear outside moulding as shown in the illustration.



Hide 75393 2.INSTALL NO. 2 OUTSIDE MOULDING RETAINER

a.

When using a new rear door outside moulding:

i.

Clean the surface of a new rear door outside moulding.



b.

When reusing the rear door outside moulding:

i.

Remove the double-sided tape from the rear door outside moulding.


ii.

Wipe off any tape adhesive residue with cleaner.



c.

Install a new No.2 outside moulding retainer.

i.

Remove the release paper from the No.2 outside moulding retainer.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



ii.
B458740C02
0.469,1.052 0.99,1.052 0.99,1.052 0.542,1.146 true 2.833,1.063 2.479,1.063 2.479,1.063 2.896,1.125 true 1.031,0.917 1.25,1.104 0.219,0.188 10 true *a 0.583,0.76 0.75,0.927 0.167,0.167 10 true *b 2.24,0.917 2.458,1.104 0.219,0.188 10 true *a 2.625,0.74 2.792,0.906 0.167,0.167 10 true *b
*a Mark-off Line
*b 4.0 mm (0.157 in.)


Install the No.2 outside moulding retainer as shown in the illustration.



Hide 75797 3.INSTALL REAR DOOR UPPER OUTSIDE MOULDING PAD

a.

When using a new rear door outside moulding:

i.

Clean the surface of a new rear door outside moulding.



b.

When reusing the rear door outside moulding:

i.

Remove the double-sided tape from the rear door outside moulding.


ii.

Wipe off any tape adhesive residue with cleaner.



c.

Install a new rear door upper outside moulding pad.

i.

Remove the release paper from the rear door upper outside moulding pad.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



ii.
B458741C07
0.823,0.479 1.208,0.667 1.208,0.667 0.938,0.396 true 2.281,0.479 2.208,0.792 2.208,0.792 2.531,0.469 true 0.729,0.156 1.042,0.313 0.313,0.156 10 false *b 2.323,0.146 2.635,0.302 0.313,0.156 10 false *c 1.24,0.625 1.438,0.802 0.198,0.177 10 true *a 2.115,0.792 2.313,0.969 0.198,0.177 10 true *a
*a Mark-off Line
*b 3.0 mm (0.118 in.)
*c 13 mm (0.512 in.)


Install the rear door upper outside moulding pad as shown in the illustration.