Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER (for GR SPORT) › 2020.08–2020.12
RM32K0E _59 Vehicle Exterior _061792 EXTERIOR PANELS / TRIM _0440079 FRONT BUMPER(for GR SPORT) A

EXTERIOR PANELS / TRIM  FRONT BUMPER(for GR SPORT)  REMOVAL  


PROCEDURE

Hide 53141F 1.REMOVE RADIATOR COVER

a.
B557783

Remove the 5 clips and 2 hood bumper cushions.


b.
B557989C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws and guides to remove the radiator cover as shown in the illustration.


Hide 75602A 2.SEPARATE FRONT FENDER MOULDING SUB-ASSEMBLY LH

a.
B482753C01
0,0 0,0 false
V100155

Protective Tape


Apply protective tape around the front fender moulding sub-assembly LH.


b.

Remove the 3 screws.


c.

Remove the 2 clips.


d.
B473971C01
2.844,0.635 3.052,0.813 0.208,0.177 10 true *a
*a 90 deg


Using a screwdriver, turn the pin 90 degrees to remove the pin hold clip.


e.
B591190C01
0,0 0,0 false
V113146

Place Hand Here
V100135

Push
V113147

Remove in this Direction


Pull back the edge of the front fender liner LH to disengage the claws by pushing the area indicated by the arrow in the illustration with a finger.

NOTICE:
·

Do not apply excessive force when pulling back the front fender liner LH.

·

To avoid damaging the claws, do not forcibly pull the front fender moulding sub-assembly LH.




f.

Disengage the clips to disconnect the front fender moulding sub-assembly LH.


Hide 75601A 3.SEPARATE FRONT FENDER MOULDING SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 4.REMOVE FRONT BUMPER ASSEMBLY

a.
B557990C01
0,0 0,0 false
V100155

Protective Tape


Apply protective tape around the front bumper assembly.

HINT:

Use the same procedure for the RH side and LH side.



b.
B465603

Remove the 6 screws.


c.
B557992C01
0,0 0,0 false
V113146

Place Hand Here
V113147

Remove in this Direction


Disengage the claws as shown in the illustration.

HINT:

Use the same procedure for the RH side and LH side.



d.
B557994

Disconnect the 2 connectors.


e.
B557991

Remove the 3 bolts.


f.
B557995C01
0,0 0,0 false
V113146

Place Hand Here
V113147

Remove in this Direction


Disengage the claws to remove the front bumper assembly as shown in the illustration.