Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › from 2020.08
RM32K0E _51 Engine / Hybrid System _061336 CRUISE CONTROL _0304571 DYNAMIC RADAR CRUISE CONTROL SYSTEM D

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  DTC CHECK / CLEAR  


CHECK DTC


a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Cruise Control*1 or Radar Cruise 2*2 / Trouble Codes.

Powertrain > Cruise Control > Trouble Codes
50001 399
Powertrain > Radar Cruise2 > Trouble Codes
50001 426

Cruise Control: Stored in the hybrid vehicle control ECU

Radar Cruise2: Stored in the millimeter wave radar sensor assembly



e.

Check for DTCs (Test Failed / Pending / Confirmed).

HINT:
GTS Display Description
Test Failed Shows the malfunction judgment results during the current trip.
Pending Shows the malfunction judgment results up to now. (Indicates the possibility of a malfunction when no DTC is confirmed.)
Confirmed Shows the DTCs confirmed up to now. (The number of current trips differs for each DTC.)

Freeze frame data is stored respectively for pending DTCs, confirmed DTCs and the latest DTCs.




CLEAR DTC


a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Cruise Control*1 or Radar Cruise 2*2 / Clear DTCs.

Powertrain > Cruise Control > Clear DTCs
50002 399
Powertrain > Radar Cruise2 > Clear DTCs
50002 426

Cruise Control: Stored in the hybrid vehicle control ECU

Radar Cruise2: Stored in millimeter wave radar sensor assembly


HINT:

Clearing the DTCs will also clear the freeze frame data.