Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › from 2020.08
RM32K0E _51 Engine / Hybrid System _061336 CRUISE CONTROL _0304571 DYNAMIC RADAR CRUISE CONTROL SYSTEM C

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  P057113  Brake Switch "A" Circuit Open  


DESCRIPTION

When the brakes are applied by the dynamic radar cruise control system, the skid control ECU (brake booster with master cylinder assembly) operates the stop light switch assembly (stop light control relay) to illuminate the stop lights.

If the hybrid vehicle control ECU receives a signal from the skid control ECU (brake booster with master cylinder assembly) indicating a malfunction of the stop light control relay, DTC P057113 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
P057113 Brake Switch "A" Circuit Open When the dynamic radar cruise control system is operating, the hybrid vehicle control ECU detects a signal indicating a stop light control relay malfunction from the skid control ECU (brake booster with master cylinder assembly) for approximately 0.2 second or more. Electronically controlled brake system Cruise Control

PROCEDURE

1.GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM
HINT:

If DTC P057113 is output by the dynamic radar cruise control system, perform troubleshooting for the electronically controlled brake system first.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING


Result:
Proceed to
NEXT



NEXT

END