Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › from 2020.08
RM32K0E _51 Engine / Hybrid System _061336 CRUISE CONTROL _0304571 DYNAMIC RADAR CRUISE CONTROL SYSTEM C

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  U012587  Lost Communication With Multi-axis Acceleration Sensor Module Missing Message  U012687  Lost Communication with Steering Angle Sensor Module Missing Message  U012987  Lost Communication with Brake System Control Module Missing Message  U015587  Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message  U029387  Lost Communication with Hybrid/EV Powertrain Control Module Missing Message  U110687  Lost Communication with Electric Parking Brake Module Missing Message  


DESCRIPTION

The millimeter wave radar sensor assembly communicates with each sensor and ECU via CAN communication.

If any malfunction is detected in a CAN communication circuit, one or more CAN communication system DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
U012587 Lost Communication With Multi-axis Acceleration Sensor Module Missing Message When the vehicle speed is 1 km/h (1 mph) or more, a communication error between the millimeter wave radar sensor assembly and yaw rate and acceleration sensor (airbag sensor assembly) continues for 5 seconds or more. CAN communication system Radar Cruise2
U012687 Lost Communication with Steering Angle Sensor Module Missing Message When the dynamic radar cruise control system is operating, a communication error between the millimeter wave radar sensor assembly and steering sensor continues for 5 seconds or more. CAN communication system Radar Cruise2
U012987 Lost Communication with Brake System Control Module Missing Message When the dynamic radar cruise control system is operating, a communication error between the millimeter wave radar sensor assembly and skid control ECU (brake booster with master cylinder assembly) continues for 5 seconds or more. CAN communication system Radar Cruise2
U015587 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message When the dynamic radar cruise control system is operating, a communication error between the millimeter wave radar sensor assembly and combination meter assembly continues for 12 seconds or more. CAN communication system Radar Cruise2
U029387 Lost Communication with Hybrid/EV Powertrain Control Module Missing Message When the dynamic radar cruise control system is operating, a communication malfunction between the hybrid vehicle control ECU and millimeter wave radar sensor assembly is detected for 6 seconds or more. CAN communication system Radar Cruise2
U110687 Lost Communication with Electric Parking Brake Module Missing Message When the power switch is on (IG) for 2 seconds or more, a communication error between the millimeter wave radar sensor assembly and parking brake ECU (brake actuator assembly) continues for 5 seconds or more. CAN communication system Radar Cruise2

PROCEDURE

1.CLEAR DTC
a.

Clear the DTCs.

Powertrain > Radar Cruise2 > Clear DTCs
50002 426

Result:
Proceed to
NEXT



NEXT

2.CHECK FOR DTCs
2.CHECK FOR DTCs
a.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



b.

Check for DTCs.

Powertrain > Radar Cruise2 > Trouble Codes
50001 426

Result:
Result Proceed to
DTC U012587, U012687, U012987, U015587, U029387 and U110687 are not output A
DTC U012587, U012687, U012987, U015587, U029387 or U110687 is output B



A

B