Home › Engine / Hybrid System › CRUISE CONTROL › ROAD SIGN ASSIST SYSTEM › from 2020.08
RM32K0E _51 Engine / Hybrid System _061336 CRUISE CONTROL _0304574 ROAD SIGN ASSIST SYSTEM C

CRUISE CONTROL  ROAD SIGN ASSIST SYSTEM  U012587  Lost Communication with Multi-axis Acceleration Sensor Module Missing Message  U012987  Lost Communication with Brake System Control Module Missing Message  U014087  Lost Communication with Body Control Module Missing Message  U015587  Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message  U029387  Lost Communication with Hybrid/EV Powertrain Control Module Missing Message  


DESCRIPTION

When a malfunction is detected between various ECUs and sensors, these DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
U012587 Lost Communication with Multi-axis Acceleration Sensor Module Missing Message When the road sign assist system is ON and the power switch is on (IG) for 3 seconds or more, and the vehicle speed is 1 km/h (1 mph) or more, a communication error between the forward recognition camera and yaw rate and acceleration sensor (airbag sensor assembly) continues for 5 seconds or more. CAN communication system
U012987 Lost Communication with Brake System Control Module Missing Message When the road sign assist system is ON and the power switch is on (IG) for 3 seconds or more, a communication malfunction between the forward recognition camera and the skid control ECU (brake booster with master cylinder assembly) continues for 1 second or more. CAN communication system
U014087 Lost Communication with Body Control Module Missing Message When the road sign assist system is ON and the power switch is on (IG) for 3 seconds or more, a communication malfunction between the forward recognition camera and the main body ECU (multiplex network body ECU) continues for approximately 5 seconds or more. CAN communication system
U015587 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message When the road sign assist system is ON and the power switch is on (IG) for 3 seconds or more, a communication malfunction between the forward recognition camera and the combination meter assembly continues for 5 seconds or more. CAN communication system
U029387 Lost Communication with Hybrid/EV Powertrain Control Module Missing Message When the road sign assist system is ON and the power switch is on (IG) for 3 seconds or more, and the vehicle is being driven at a speed of 5 km/h (3 mph) or more, a communication malfunction between the forward recognition camera and the hybrid vehicle control ECU continues for approximately 2 seconds or more. CAN communication system

PROCEDURE

1.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Road Sign Assist > Clear DTCs
50002 431

Result:
Proceed to
NEXT



NEXT

2.CHECK FOR DTCs
2.CHECK FOR DTCs
a.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



b.

Check for DTCs.

Body Electrical > Road Sign Assist > Trouble Codes
50001 431

Result:
Result Proceed to
DTC U012587, U012987, U014087, U015587 and U029387 are not output A
DTC U012587, U012987, U014087, U015587 or U029387 is output B



A

B