Home › Engine / Hybrid System › CRUISE CONTROL › FRONT CAMERA SYSTEM › from 2020.08
RM32K0E _51 Engine / Hybrid System _061336 CRUISE CONTROL _0440928 FRONT CAMERA SYSTEM C

CRUISE CONTROL  FRONT CAMERA SYSTEM  U010187  Lost Communication with TCM Missing Message  U012687  Lost Communication with Steering Angle Sensor Module Missing Message  U012987  Lost Communication with Brake System Control Module Missing Message  U014087  Lost Communication with Body Control Module Missing Message  U015587  Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message  U029387  Lost Communication with Hybrid/EV Powertrain Control Module Missing Message  


DESCRIPTION

When a malfunction is detected between various ECUs and sensors, these DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
U010187 Lost Communication with TCM Missing Message When the power switch is on (IG) for 3 seconds or more, a communication malfunction between the forward recognition camera and the hybrid vehicle control ECU continues for approximately 5 seconds or more. CAN communication system
U012687 Lost Communication with Steering Angle Sensor Module Missing Message When the power switch is on (IG) for 3 seconds or more, a communication malfunction between the forward recognition camera and the steering sensor continues for approximately 1 second or more. CAN communication system
U012987 Lost Communication with Brake System Control Module Missing Message When the power switch is on (IG) for 3 seconds or more, a communication malfunction between the forward recognition camera and the skid control ECU (brake booster with master cylinder assembly) continues for approximately 1 second or more. CAN communication system
U014087 Lost Communication with Body Control Module Missing Message When the power switch is on (IG) for 3 seconds or more, a communication malfunction between the forward recognition camera and the main body ECU (multiplex network body ECU) continues for approximately 5 seconds or more. CAN communication system
U015587 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message When the power switch is on (IG) for 3 seconds or more, a communication malfunction between the forward recognition camera and the combination meter assembly continues for 5 seconds or more. CAN communication system
U029387 Lost Communication with Hybrid/EV Powertrain Control Module Missing Message When the power switch is on (IG) for 3 seconds or more, and the vehicle is being driven at a speed of 5 km/h (3 mph) or more, a communication malfunction between the forward recognition camera and the hybrid vehicle control ECU continues for approximately 2 seconds or more. CAN communication system

PROCEDURE

1.CLEAR DTC
a.

Clear the DTCs.

Chassis > Front Recognition Camera > Clear DTCs
50002 430

Result:
Proceed to
NEXT



NEXT

2.CHECK FOR DTCs
2.CHECK FOR DTCs
a.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



b.

Check for DTCs.

Chassis > Front Recognition Camera > Trouble Codes
50001 430

Result:
Result Proceed to
DTC U010187, U012687, U012987, U014087, U015587 and U029387 are not output A
DTC U010187, U012687, U012987, U014087, U015587 or U029387 is output B



A

B