Home › Engine / Hybrid System › CRUISE CONTROL › LANE TRACING ASSIST SYSTEM › from 2020.08
RM32K0E _51 Engine / Hybrid System _061336 CRUISE CONTROL _0440929 LANE TRACING ASSIST SYSTEM C

CRUISE CONTROL  LANE TRACING ASSIST SYSTEM  U010187  Lost Communication with TCM Missing Message  U012587  Lost Communication With Multi-axis Acceleration Sensor Module Missing Message  U012687  Lost Communication with Steering Angle Sensor Module Missing Message  U012987  Lost Communication with Brake System Control Module Missing Message  U013187  Lost Communication with Power Steering Control Module Missing Message  U015587  Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message  U029387  Lost Communication with Hybrid/EV Powertrain Control Module Missing Message  


DESCRIPTION

When a communication malfunction is detected between the forward recognition camera and an ECU or sensor, a DTC is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
U010187 Lost Communication with TCM Missing Message When the power switch is on (IG) for 3 seconds or more, a communication malfunction between the forward recognition camera and the hybrid vehicle control ECU continues for approximately 8 seconds or more. CAN communication system
U012587 Lost Communication With Multi-axis Acceleration Sensor Module Missing Message When the vehicle speed is 1 km/h or more, a communication error between the forward recognition camera and yaw rate and acceleration sensor (air bag sensor assembly) continues for 5 seconds or more. CAN communication system
U012687 Lost Communication with Steering Angle Sensor Module Missing Message When the power switch is on (IG) for 3 seconds or more, a communication malfunction between the forward recognition camera and the steering sensor continues for approximately 1 second or more. CAN communication system
U012987 Lost Communication with Brake System Control Module Missing Message When the power switch is on (IG) for 3 seconds or more, a communication malfunction between the forward recognition camera and the skid control ECU (brake booster with master cylinder assembly) continues for approximately 1 second or more. CAN communication system
U013187 Lost Communication with Power Steering Control Module Missing Message When the power switch is on (IG) for 3 seconds or more, a communication malfunction between the forward recognition camera and the power steering ECU assembly continues for approximately 1 second or more. CAN communication system
U015587 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message When the power switch is on (IG) for 3 seconds or more, a communication malfunction between the forward recognition camera and the combination meter assembly continues for 8 seconds or more. CAN communication system
U029387 Lost Communication with Hybrid/EV Powertrain Control Module Missing Message When the power switch is on (IG) for 3 seconds or more, a communication malfunction between the forward recognition camera and the hybrid vehicle control ECU continues for approximately 2 seconds or more. CAN communication system

PROCEDURE

1.CLEAR DTC
a.

Clear the DTCs.

Chassis > Lane Control > Clear DTCs
50002 418

Result:
Proceed to
NEXT



NEXT

2.CHECK FOR DTCs
2.CHECK FOR DTCs
a.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



b.

Using the GTS, check for DTCs.

Chassis > Lane Control > Trouble Codes
50001 418

Result:
Result Proceed to
DTC U010187, U012587, U012687, U012987, U013187, U015587 and U029387 are not output A
DTC U010187, U012587, U012687, U012987, U013187, U015587 or U029387 is output B



A

B