Home › Engine / Hybrid System › CRUISE CONTROL › FRONT RADAR SENSOR SYSTEM › from 2020.08
RM32K0E _51 Engine / Hybrid System _061336 CRUISE CONTROL _0441045 FRONT RADAR SENSOR SYSTEM D

CRUISE CONTROL  FRONT RADAR SENSOR SYSTEM  DTC CHECK / CLEAR  


CHECK DTC


a.

Connect the GTS to the DLC3.


b.

Turn the Power switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Front Radar Sensor / Trouble Codes.

Body Electrical > Front Radar Sensor > Trouble Codes
50001 429

e.

Check for DTCs (Test Failed / Pending / Confirmed).

HINT:
GTS Display Description
Test Failed Represent malfunctions that were detected during the current trip.
Pending Represent malfunctions which have occurred since the DTCs were last cleared but have not been confirmed.
Confirmed Represent malfunctions which have occurred since the DTCs were last cleared and have been confirmed. (The number of trips since the DTC was stored may differ for each DTC.)

Freeze frame data is stored respectively for pending DTCs, confirmed DTCs and the latest DTCs.




CLEAR DTC


a.

Connect the GTS to the DLC3.


b.

Turn the Power switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Front Radar Sensor / Clear DTCs.

Body Electrical > Front Radar Sensor > Clear DTCs
50002 429

e.

Clear the DTCs.

HINT:

Clearing the DTCs will also clear the freeze frame data.