Home › Vehicle Exterior › ACOUSTIC VEHICLE ALERTING SYSTEM › ACOUSTIC VEHICLE ALERTING SYSTEM › from 2020.08
RM32K0E _59 Vehicle Exterior _094426 ACOUSTIC VEHICLE ALERTING SYSTEM _0444527 ACOUSTIC VEHICLE ALERTING SYSTEM D

ACOUSTIC VEHICLE ALERTING SYSTEM  ACOUSTIC VEHICLE ALERTING SYSTEM  OPERATION CHECK  


ACOUSTIC VEHICLE ALERTING SYSTEM OPERATION CHECK


a.

System operation check (vehicle stopped)

i.

Apply the parking brake.


ii.

Turn the power switch on (READY).


iii.

With the brake pedal depressed, confirm that the acoustic vehicle alerting system does not operate (does not produce a sound) when the shift state is changed from park (P) to neutral (N).


iv.

When the brake pedal is released, confirm that the acoustic vehicle alerting system operates for approximately 3 seconds (produces a sound).



b.

System operation check (vehicle being driven)

i.

Turn the power switch on (READY).


ii.

Operate the EV drive mode switch and drive the vehicle using EV drive mode.


iii.

When the shift state is changed from park (P) to drive (D), confirm that the acoustic vehicle alerting system operates (produces a sound) when the vehicle is driven at speeds of 25 km/h (16 mph) or less using EV drive mode.