Home › Engine / Hybrid System › M20A-FXS (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE › from 2020.08
RM32K0E _51 Engine / Hybrid System _083960 M20A-FXS ENGINE CONTROL _0404832 CAMSHAFT OIL CONTROL VALVE G

M20A-FXS ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 15370 1.REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY

Hide 135A0B 2.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (EXHAUST CAMSHAFT TIMING GEAR BOLT ASSEMBLY)

a.
A460582C05
2.042,1.615 2.042,1.146 true 1.948,1.698 2.26,1.896 0.313,0.198 10 true *a
*a Plunger


Check the stroke of the plunger in the center of the camshaft timing oil control valve assembly (exhaust camshaft timing gear bolt assembly).

Standard Stroke:

2.2 mm (0.0866 in.) or more


If the result is not as specified, replace the camshaft timing oil control valve assembly (exhaust camshaft timing gear bolt assembly).


Hide 15370 3.INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY