Home › Engine / Hybrid System › M20A-FXS (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE › from 2020.08
RM32K0E _51 Engine / Hybrid System _083960 M20A-FXS ENGINE CONTROL _0404832 CAMSHAFT OIL CONTROL VALVE A

M20A-FXS ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 15370 1.REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY

Hide 135A0B 2.REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (EXHAUST CAMSHAFT TIMING GEAR BOLT ASSEMBLY)

a.
A479071C01
2.198,1.052 2.844,0.969 2.844,0.969 2.031,1.323 true 1.75,0.885 2.104,0.5 true 1.542,1.677 1.896,1.188 true 1.365,1.667 1.677,1.823 0.313,0.156 10 true *1 2.135,0.417 2.448,0.573 0.313,0.156 10 true *2 2.917,0.854 3.229,1.01 0.313,0.156 10 false *a
*1 Camshaft Timing Oil Control Valve Assembly
(Exhaust Camshaft Timing Gear Bolt Assembly)
*2 Bolt
*a Do not remove


Using a 5 mm hexagon socket wrench, remove the bolt.

NOTICE:

Do not remove the other 2 bolts.


HINT:

If it is difficult to loosen the bolt due to the tools contacting the vehicle body or other parts, rotate the crankshaft to move the bolt to a position where it can be removed easily.



b.

Remove the camshaft timing oil control valve assembly (exhaust camshaft timing gear bolt assembly) from the camshaft timing exhaust gear assembly.