Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HIGH BEAM SYSTEM › from 2020.08
RM32K0E _59 Vehicle Exterior _061162 LIGHTING (EXT) _0299231 AUTOMATIC HIGH BEAM SYSTEM C

LIGHTING (EXT)  AUTOMATIC HIGH BEAM SYSTEM  U012687  Lost Communication with Steering Angle Sensor Module Missing Message  U012987  Lost Communication with Brake System Control Module Missing Message  U014087  Lost Communication with Body Control Module Missing Message  U029387  Lost Communication With Hybrid Powertrain Control Module Missing Message  


DESCRIPTION

These DTCs are stored if a CAN communication malfunction occurs between the forward recognition camera and other ECUs.

DTC No. Detection Item DTC Detection Condition Trouble Area Note
U012687 Lost Communication with Steering Angle Sensor Module Missing Message The forward recognition camera does not receive data from the steering sensor for approximately 5 seconds or more.
·

CAN communication system

·

Steering sensor


-
U012987 Lost Communication with Brake System Control Module Missing Message

The forward recognition camera does not receive data from the skid control ECU (brake booster with master cylinder assembly) for approximately 5 seconds or more.


·

CAN communication system

·

Skid control ECU (brake booster with master cylinder assembly)


-
U014087 Lost Communication with Body Control Module Missing Message The forward recognition camera does not receive data from the main body ECU (multiplex network body ECU) for approximately 5 seconds or more.
·

CAN communication system

·

Main body ECU (multiplex network body ECU)


-
U029387 Lost Communication With Hybrid Powertrain Control Module Missing Message The forward recognition camera does not receive data from the hybrid vehicle control ECU for approximately 5 seconds or more.
·

CAN communication system

·

Hybrid vehicle control ECU


-

PROCEDURE

1.CLEAR DTC
a.

Enter the following menus: Body Electrical / Front Recognition Camera (Front Lighting Control) / Trouble Codes.


b.

Clear the DTCs.

Body Electrical > Front Recognition Camera (Front Lighting Control) > Clear DTCs
50002 433

Result:
Proceed to
NEXT



NEXT

2.CHECK FOR DTC
2.CHECK FOR DTC
a.

Turn the power switch on (IG).


b.

Wait 10 seconds or more.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Front Recognition Camera (Front Lighting Control) / Trouble Codes.


e.

Check for DTCs.

Body Electrical > Front Recognition Camera (Front Lighting Control) > Trouble Codes
50001 433

Result:
Result Proceed to
DTC are not output A
U010087, U12587, U012687, U012987 or U014087 are output B
None of the above conditions are met C



A

B

C

GO TO DIAGNOSTIC TROUBLE CODE CHART