Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE › from 2020.12
RM32K0E _59 Vehicle Exterior _061792 EXTERIOR PANELS / TRIM _0304177 NAME PLATE A

EXTERIOR PANELS / TRIM  NAME PLATE  REMOVAL  


CAUTION / NOTICE / HINT

HINT:

When removing the name plates, heat the vehicle body, back door outside garnish, front bumper assembly and name plates using a heat light.


Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
·

Back Door Outside Garnish

·

Front Bumper Assembly

·

Name Plate


20 to 30°C (68 to 86°F)

CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts, touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the vehicle body, back door outside garnish, front bumper assembly or name plate excessively.


PROCEDURE

Hide 75442A 1.REMOVE NO. 2 BACK DOOR NAME PLATE

a.
B458669C01
1.625,1.5 2.896,1.323 true 2.708,0.646 3.052,0.646 true 3.094,0.531 3.344,0.75 0.25,0.219 10 true *a 2.948,1.198 3.177,1.385 0.229,0.188 10 true *b
*a Wooden Block
*b Piano Wire
V100155

Protective Tape


Apply protective tape around the No. 2 back door name plate as shown in the illustration.


b.

Insert a piano wire between the back door outside garnish and No. 2 back door name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the No. 2 back door name plate to the back door outside garnish to remove the No. 2 back door name plate.

NOTICE:

Be careful not to damage the back door outside garnish.



e.

Remove the protective tape.


Hide 75441E 2.REMOVE NO. 1 BACK DOOR NAME PLATE

a.
B458674C01
2.729,0.583 3.094,0.542 true 1.979,1.365 2.781,1.021 true 3.135,0.427 3.375,0.625 0.24,0.198 10 true *a 2.823,0.885 3.063,1.083 0.24,0.198 10 true *b
*a Wooden Block
*b Piano Wire
V100155

Protective Tape


Apply protective tape around the No. 1 back door name plate as shown in the illustration.


b.

Insert a piano wire between the back door outside garnish and No. 1 back door name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the No. 1 back door name plate to the back door outside garnish to remove the No. 1 back door name plate.

NOTICE:

Be careful not to damage the back door outside garnish.



e.

Remove the protective tape.


Hide 75431A 3.REMOVE NO. 1 BACK DOOR EMBLEM

a.
B458667C01
0.677,3.99 0.938,3.583 true 2.75,4.135 2.438,3.781 true 0.573,3.99 0.813,4.198 0.24,0.208 10 false *a 2.719,4.156 2.958,4.365 0.24,0.208 10 false *a
*a Location Pin
V100155

Protective Tape


Apply protective tape around the No. 1 back door emblem as shown in the illustration.


b.

Using a moulding remover D, separate the double-sided tape and disengage the location pins to remove the No. 1 back door emblem.

NOTICE:

Be careful not to damage the back door outside garnish.



c.

Remove the protective tape.


Hide 75374 4.REMOVE SIDE PANEL EMBLEM

HINT:

Use the same procedure for the RH side and LH side.


a.
B458889C01
2.906,0.927 2.698,0.708 true 2.635,1.385 1.729,1.51 true 2.99,0.906 3.219,1.104 0.229,0.198 10 true *a 2.698,1.25 2.927,1.448 0.229,0.198 10 true *b
*a Wooden Block
*b Piano Wire
V100155

Protective Tape


Apply protective tape around the side panel emblem as shown in the illustration.


b.

Insert a piano wire between the vehicle body and side panel emblem.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the side panel emblem to the vehicle body to remove the side panel emblem.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the protective tape.


Hide 75443 5.REMOVE NO. 3 BACK DOOR NAME PLATE

a.
B458670C01
2.76,0.615 3.042,0.76 true 1.906,1.375 2.917,1.146 true 3.083,0.656 3.396,0.813 0.313,0.156 10 false *a 2.969,1.042 3.281,1.198 0.313,0.156 10 false *b
*a Wooden Block
*b Piano Wire
V100155

Protective Tape


Apply protective tape around the No. 3 back door name plate as shown in the illustration.


b.

Insert a piano wire between the back door outside garnish and No. 3 back door name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the No. 3 back door name plate to the back door outside garnish to remove the No. 3 back door name plate.

NOTICE:

Be careful not to damage the back door outside garnish.



e.

Remove the protective tape.


Hide 75310A 6.REMOVE RADIATOR GRILLE EMBLEM ASSEMBLY (for TMC Made GR SPORT)

a.
B558038C02
0.573,4.146 0.958,3.938 true 2.698,3.594 2.281,3.406 true 0.385,4.083 0.625,4.292 0.24,0.208 10 false *a 2.74,3.542 2.979,3.75 0.24,0.208 10 false *a
*a Location Pin
V100155

Protective Tape


Apply protective tape around the radiator grille emblem assembly as shown in the illustration.


b.

Using a moulding remover A, separate the double-sided tape and disengage the location pins to remove the radiator grille emblem assembly.

NOTICE:

Be careful not to damage the front bumper assembly.



c.

Remove the protective tape.


Hide 75441C 7.REMOVE BACK DOOR NAME PLATE (for GR SPORT)

a.
B591191C01
3.01,1.729 2.885,1.438 true 1.948,2.344 2.323,2.125 true 2.938,1.771 3.167,1.969 0.229,0.198 10 false *a 2.313,2.021 2.542,2.219 0.229,0.198 10 true *b
*a Wooden Block
*b Piano Wire
V100155

Protective Tape


Apply protective tape around the back door name plate as shown in the illustration.


b.

Insert a piano wire between the vehicle body and back door name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the back door name plate to the vehicle body to remove the back door name plate.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the protective tape.


Hide 75365 8.REMOVE FRONT FENDER EMBLEM (for TMC Made GR SPORT)

HINT:

Use the same procedure for the RH side and LH side.


a.
B591192C01
1.688,2.99 2.104,2.844 true 2.021,1.229 2.26,1.542 true 1.438,2.938 1.688,3.115 0.25,0.177 10 true *a 2.271,1.552 2.521,1.729 0.25,0.177 10 true *b
*a Wooden Block
*b Piano Wire
V100155

Protective Tape


Apply protective tape around the front fender emblem as shown in the illustration.


b.

Insert a piano wire between the vehicle body and front fender emblem.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the front fender emblem to the vehicle body to remove the front fender emblem.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the protective tape.