Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Radio and Display Type with Dual Knob Type) › from 2022.01
RM32K0E _56 Audio / Visual / Telematics _061290 NAVIGATION / MULTI INFO DISPLAY _0524476 NAVIGATION SYSTEM(for Radio and Display Type with Dual Knob Type) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Radio and Display Type with Dual Knob Type)  Touch Panel Switch does not Function  


PROCEDURE

1.CHECK MULTI-DISPLAY
a.

Check if there is any foreign matter caught between the display and exterior frame of the multi-display.

OK:

No foreign matter is caught between the display and exterior frame of the multi-display.


HINT:
·

If there is foreign matter between the display and exterior frame of the multi-display, the touch panel will remain pressed, preventing touch switch operation.

·

Turn the power switch on (ACC) or on (IG) with your hand touching the multi-display, the display may stop responding correctly.




Result:
Proceed to
OK
NG



OK

2.CHECK TOUCH PANEL

NG

REMOVE FOREIGN MATTER

2.CHECK TOUCH PANEL
a.

Check for foreign matter on the display.

OK:

The display is clean.



Result:
Proceed to
OK
NG



OK

3.CHECK TOUCH SWITCH (OPERATION CHECK)

NG

CLEAN DISPLAY AND RECHECK TOUCH PANEL

3.CHECK TOUCH SWITCH (OPERATION CHECK)
a.
E176521

Enter the "Touch Switch Check" screen. Refer to Check Touch Switch in Operation Check.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM (for Radio and Display Type with Dual Knob Type)>OPERATION CHECK


b.

Touch the display in the area where the switch malfunction occurs.

OK:

A "+" mark appears at the touched position.



Result:
Proceed to
OK
NG



OK

NG