Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Radio and Display Type with Dual Knob Type) › from 2022.01
RM32K0E _56 Audio / Visual / Telematics _061290 NAVIGATION / MULTI INFO DISPLAY _0524476 NAVIGATION SYSTEM(for Radio and Display Type with Dual Knob Type) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Radio and Display Type with Dual Knob Type)  "No GPS signal" mark is displayed  


CAUTION / NOTICE / HINT

NOTICE:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM (for Radio and Display Type with Dual Knob Type)>PRECAUTION


PROCEDURE

1.CHECK CABIN
a.

Check the cabin for any object that might interrupt radio reception or additional devices which use radio waves on the instrument panel. If such an object exists, remove it and check if the "No GPS signal" mark disappears.

HINT:

The GPS uses extremely weak radio waves originating from satellites. If the signal is interrupted by obstructions or other radio waves, the GPS may not be able to properly receive the signal.


OK:

The "No GPS signal" mark disappears.



Result:
Proceed to
OK
NG



OK

END

NG

2.CHECK SURROUNDINGS
2.CHECK SURROUNDINGS
a.

Check if the vehicle is in a location where GPS signal reception is poor. If the vehicle is in such a place, relocate the vehicle and check if the "No GPS signal" mark disappears.

HINT:

The GPS uses 24 satellites in 6 orbits. At any point in time, 4 satellites should be able to pinpoint your vehicle. However, GPS signals may not reach the vehicle due to influence from the surroundings, vehicle direction and time. For examples, see the following illustration.


I100196C18
0.167,0.094 0.385,0.292 0.219,0.198 10 false *a 1.25,2.063 1.458,2.26 0.208,0.198 10 false *b 3.333,2.146 3.573,2.354 0.24,0.208 10 false *c 3.417,4.052 3.604,4.26 0.188,0.208 10 false *f 1.208,3.99 1.406,4.188 0.198,0.198 10 false *e 5.24,2.115 5.469,2.313 0.229,0.198 10 false *d 5.5,4.073 5.688,4.281 0.188,0.208 10 false *g
*a Example *b In a tunnel
*c In a building *d Under an overpass
*e On a forest or tree-lined path *f Between tall buildings
*g Under a cliff or overhang - -


OK:

The "No GPS signal" mark disappears.



Result:
Proceed to
OK
NG



OK

SYSTEM RETURNS TO NORMAL

NG

3.CHECK GPS INFORMATION (OPERATION CHECK)
3.CHECK GPS INFORMATION (OPERATION CHECK)
a.
E273705

Enter the "System Sensors Check" screen. Refer to Check GPS & Vehicle Sensors in Operation Check.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM (for Radio and Display Type with Dual Knob Type)>OPERATION CHECK


b.

Check how many of the following codes appear in the "Reception number" column.

HINT:

T or P appears.


OK:

At least 3 codes appear.



Result:
Proceed to
OK
NG



OK

NG