Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.
Check whether the customer's device supports "Miracast" functionality.
For supported devices, Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM (for Radio and Display Type with Dual Knob Type)>SYSTEM DESCRIPTION
| Result | Proceed to |
|---|---|
| The customer's device supports "Miracast" functionality | A |
| The customer's device does not support "Miracast" functionality | B |
A
B
Check whether the "Miracast" functionality is set to "On" in the settings of the customer's device.
"Miracast" is normally set to "Off" by default. As a result, the setting must be manually changed to "On".
The operation method differs depending on the device. The name "Miracast" also refers to "Screen Mirroring" and "Media Output", etc.
| Result | Proceed to |
|---|---|
| "Miracast" functionality is set to "On" in the settings of the customer's device | A |
| "Miracast" functionality is not set to "On" in the settings of the customer's device | B |
A
B
Check that the "Wi-Fi power" setting is "On" in the "Wi-Fi" settings on the multi-display.
Check that the "Access to network" setting is "Off" in the "Wi-Fi" settings on the multi-display.*
*: w/ "Wi-Fi" (Station) Function
Check that the "Bluetooth power" setting is "Off" on the multi-display.
Bluetooth and "Miracast" and "Wi-Fi" use the same 2.4 GHz band radio waves. As a result, the connection may suffer from outages due to radio interference if connecting simultaneously.
| Proceed to |
|---|
| NEXT |
NEXT
Check connection:
Check the connection between the device and "Miracast" on the multi-display in the vehicle and on the device itself.
Allow Miracast video to be streamed to the multi-display and wait for 15 seconds.
Check that the smartphone screen is displayed on the multi-display.
If the "Miracast" connection cannot be established even after checking, check the connection again.
| Result | Proceed to |
|---|---|
| Smartphone screen is displayed on the multi-display | A |
| "Miracast" connection cannot be established even after performing the above connection check twice | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
Check using another "Miracast" supported device.
| Result | Proceed to |
|---|---|
| Established connection with "Miracast" | A |
| Could not establish connection with "Miracast" | B |
A
B
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>RADIO RECEIVER (for Radio Receiver Type)>REMOVAL