Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type with Dual Knob Type) › from 2022.01
RM32K0E _56 Audio / Visual / Telematics _061817 AUDIO / VIDEO _0524509 AUDIO AND VISUAL SYSTEM(for Radio and Display Type with Dual Knob Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type with Dual Knob Type)  Voice is not Recognized  


PROCEDURE

1.CHECK CONDITION
a.

While paying attention to the condition of the spoken voice command, perform a voice recognition operation.

OK:

Voice command is recognized normally.


HINT:
·

When the voice command is recognized, the content of the voice command is displayed in the voice recognition result display area to the right of the mic icon. (Example: When "Cancel" is spoken, "Cancel" is displayed in the voice recognition result display area.)

·

When the voice command is recognized, the content of the voice command is displayed in the voice recognition result display area to the right of the mic icon.

·

If an unnecessary word (such as "um" or "ah") is spoken before or after the recognition word, the system incorrectly recognizes the recognition word.

·

The system cannot recognize voice commands when multiple people are speaking simultaneously.

·

If the speaking speed is too fast or too slow, the recognition rate may decrease.

·

The system may have difficulty recognizing voice commands depending on the voice quality (such as a hoarse voice due to poor physical condition).



Result:
Proceed to
OK
NG




OK

END (VOICE RECOGNITION MAY BE DIFFICULT DUE TO SPEECH CONDITION)

NG