This DTC is stored when a malfunction occurs in the stereo component amplifier assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B15A396 | Stereo Component Amplifier Component Internal Failure | When any of the following conditions is met:
(2 trip detection logic) ·
Internal power supply malfunction ·
Internal malfunction ·
DSP error ·
EEPROM error |
Stereo component amplifier assembly |
Clear the DTCs.
Turn the ignition switch off.
Check for DTCs and proceed to the following step.
| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| DTC B15A396 is output | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B