86719B
1.INSTALL NO. 2 TELEPHONE BRACKET (for eCall with Single Knob Type Radio and Display)
Install the No. 2 telephone bracket to the telephone transceiver assembly with the 2 screws.
86719A
2.INSTALL NO. 1 TELEPHONE BRACKET (for eCall with Single Knob Type Radio and Display)
Install the No. 1 telephone bracket to the telephone transceiver assembly with the 2 screws.
86740
3.REMOVE TELEPHONE TRANSCEIVER ASSEMBLY (for eCall with Single Knob Type Radio and Display)
Install the telephone transceiver assembly with the 2 nuts.
Engage the clamps.
Connect the 6 connectors.
86740
4.INSTALL TELEMATICS TRANSCEIVER (for eCall with Dual Knob Type Radio and Display)
Install the telematics transceiver with the 2 nuts.
Engage the clamps.
Connect the 3 connectors.
5.INSTALL REAR CONSOLE BOX ASSEMBLY
6.PERFORM REGISTRATION
for eCall with Single Knob Type Radio and Display:
for eCall with Dual Knob Type Radio and Display: