Home › Vehicle Exterior › BODY PANEL › BACK DOOR OPENING TROUGH
BM32H0E _01 Vehicle Exterior _060349 BODY PANEL _0295836 BACK DOOR OPENING TROUGH F

BODY PANEL  BACK DOOR OPENING TROUGH  ASSEMBLY REPLACEMENT  


K137821

With the quarter panel assembly and body lower back panel assembly removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points

K137676


INSTALLATION


Symbol Meaning
K108821

Spot Weld
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

K137677C02
2.427,2.51 3.135,3.26 3.135,3.26 3.396,3.26 false 3.448,3.146 3.76,3.302 0.313,0.156 10 false *1
*1 BACK DOOR OPENING TROUGH - -



c.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


d.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.