Home › Vehicle Exterior › BODY DIMENSIONS › UNDER BODY REFERENCE VALUES
BM32H0E _01 Vehicle Exterior _060352 BODY DIMENSIONS _0295863 UNDER BODY REFERENCE VALUES F

BODY DIMENSIONS  UNDER BODY REFERENCE VALUES  THREE-DIMENSIONAL DISTANCE  


HINT:
·

Measure points with the engine under cover no. 1, engine under cover no. 2 and front floor cover removed.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Radiator Cover Plate Standard Hole φ10 (0.39)
B, b Side Rail Reinforcement Installation Bolt M10 (0.39)
C, c Front Suspension Crossmember Installation Bolt M14 (0.55)
D, d Front Suspension Crossmember Installation Bolt M14 (0.55)
E, e Front Side Inner Rear Member Standard Hole φ18 (0.71)

K138075C01
2.823,6.76 3.135,6.917 0.313,0.156 10 false *a 0.125,8.667 0.438,8.823 0.313,0.156 10 false *b
*a Distance between points other than those above *b mm
(in.)