Home › Vehicle Exterior › BODY DIMENSIONS › REAR SUSPENSION CROSSMEMBER(for 2WD)
BM32H0E _01 Vehicle Exterior _060352 BODY DIMENSIONS _0295866 REAR SUSPENSION CROSSMEMBER(for 2WD) F

BODY DIMENSIONS  REAR SUSPENSION CROSSMEMBER(for 2WD)  TWO-DIMENSIONAL DISTANCE  


HINT:
·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Rear Suspension Crossmember Installation Hole φ24 (0.94)
B, b Rear Suspension No. 1 Lower Arm Installation Hole φ12.2 (0.48)
C, c Rear Suspension Upper Arm Installation Hole φ12.2 (0.48)
D, d Stabilizer Bracket Installation Nut M12 (0.47)
E, e Rear Suspension No. 2 Lower Arm Installation Hole 23.1X14.2
(0.91X0.56)
F, f Rear Suspension Crossmember Installation Hole φ24 (0.94)

K138069C01
3.49,1.115 3.802,1.271 0.313,0.156 10 false *A 4.208,1.74 4.521,1.896 0.313,0.156 10 false *B 2.813,1.74 3.125,1.896 0.313,0.156 10 false *C 0.167,8.667 0.479,8.823 0.313,0.156 10 false *a
*A FRONT *B LH
*C RH - -
*a mm
(in.)
- -


K138070C01
2.802,2.344 3.115,2.5 0.313,0.156 10 false *A 4.229,2.344 4.542,2.5 0.313,0.156 10 false *B 0.833,5.542 1.146,5.698 0.313,0.156 10 false *a 1.24,6.146 1.552,6.302 0.313,0.156 10 false *b 0.156,8.667 0.469,8.823 0.313,0.156 10 false *c
*A LH *B RH
*a Imaginary Datum Line *b Height from Imaginary Datum Line
*c mm
(in.)
- -