Home › Vehicle Exterior › BODY DIMENSIONS › ENGINE COMPARTMENT
BM32H0E _01 Vehicle Exterior _060352 BODY DIMENSIONS _0295867 ENGINE COMPARTMENT F

BODY DIMENSIONS  ENGINE COMPARTMENT  THREE-DIMENSIONAL DISTANCE  


HINT:
·

Point F, f on the vehicle are asymmetrical.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Front Fender Installation Nut M6 (0.24)
B, b Front Suspension Installation Hole φ12.5 (0.49)
C, c Hood Hinge Installation Nut M8 (0.31)
d Cowl Top Outer Panel Center -
E, e Front Side Member Standard Hole φ15 (0.59)
F Front Side Member Standard Hole φ13 (0.51)
f Engine Mounting Bracket Installation Nut M10 (0.39)
G, g Radiator Upper Support Installation Nut M6 (0.24)
H, h Front Bumper Reinforcement Installation Nut M10 (0.39)
J Hood Lock Support Brace Installation Nut M6 (0.24)
K, k Front Fender Extension Standard Hole φ10 (0.39)
L, l Radiator Upper Support Installation Nut M6 (0.24)
M, m Radiator Upper Support Standard Hole φ10 (0.39)

K138053C01
3.615,5.146 3.927,5.302 0.313,0.156 10 false *a 3.635,5.854 3.948,6.01 0.313,0.156 10 false *b 0.083,8.667 0.396,8.823 0.313,0.156 10 false *c
*a Height from Imaginary Datum Line *b Distance between points other than those above
*c mm
(in.)
- -