Home › Vehicle Exterior › PAINTING / COATING › BODY PANEL ANTI-RUST AGENT MATERIAL (for TMMT Made) › 2019.09–2020.08
BM32H0E _01 Vehicle Exterior _060350 PAINTING / COATING _0407951 BODY PANEL ANTI-RUST AGENT MATERIAL(for TMMT Made) F

PAINTING / COATING  BODY PANEL ANTI-RUST AGENT MATERIAL(for TMMT Made)  APPLICATION AREAS  


1.

Apply anti-rust agent (wax) to the doors and hood edges (tips of outer panel folded parts) and undersides, areas around hinges, etc., to prevent rust. Coat the undersides of the edges using a nozzle and air gun, and coat the areas around the hinges using a brush.

HINT:

If anti-rust agent (wax) is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the anti-rust agent (wax) immediately.


CAUTION:

Do not apply anti-rust agent (wax) to the thread part of the weld nut of the side surface of a rocker panel.



K154519C01
0.25,0.25 0.563,0.448 0.313,0.198 10 false *A
*A for Type A - -


K154520C02
0.25,0.25 0.563,0.448 0.313,0.198 10 false *A
*A for Type A - -


K154518C01
0.25,0.25 0.563,0.448 0.313,0.198 10 false *A
*A for Type B - -