Home › Vehicle Exterior › PAINTING / COATING › BODY PANEL UNDERCOATING (for AWD) › from 2020.08
BM32H0E _01 Vehicle Exterior _060350 PAINTING / COATING _0297235 BODY PANEL UNDERCOATING(for AWD) F

PAINTING / COATING  BODY PANEL UNDERCOATING(for AWD)  APPLICATION AREAS  


CAUTION:

Work must be performed while wearing the appropriate protective gear and in a well-ventilated area.


1.

Apply undercoating to the chassis, floor underside, sheet metal fitting weld points of the body, and inside of the wheel house to prevent rust and noise, as well as protect the body from gravel.

NOTICE:

Do not coat high temperature areas, such as the tailpipe, or moving parts, such as the drive shaft.


HINT:
·

Apply degreasing agent to a clean cloth and clean any dirt and oil from the application areas.

·

Cover the surrounding areas of the application areas with masking paper to avoid coating unnecessary areas.

·

Apply body sealer to the panel joints in advance.

·

Do not leave any gaps between the panel joints.

·

Referring to the notes above, undercoating should be applied according to the specifications for your country.




K158636C01
0.417,3.917 6.75,8.583 6.333,4.667 0.417,6.25 6.75,6.25 false 0.167,0.167 0.479,0.365 0.313,0.198 10 false *A 0.5,3.667 0.813,3.865 0.313,0.198 10 false *B 0.583,4.083 0.896,4.281 0.313,0.198 10 false *C 0.583,6.417 0.896,6.615 0.313,0.198 10 false *D
*A for TMC Made *B w/o Wheel House Liner
*C LH Side *D RH Side


K158635C01
0.417,3.917 6.75,8.583 6.333,4.667 0.417,6.25 6.75,6.25 false 0.167,0.167 0.479,0.365 0.313,0.198 10 false *A 0.5,3.667 0.813,3.865 0.313,0.198 10 false *B 0.583,4.083 0.896,4.281 0.313,0.198 10 false *C 0.583,6.417 0.896,6.615 0.313,0.198 10 false *D
*A for TMC Made *B w/ Wheel House Liner
*C LH Side *D RH Side


K159603C01
0.417,3.917 6.75,8.583 6.333,4.667 0.417,6.25 6.75,6.25 false 0.167,0.167 0.479,0.365 0.313,0.198 10 false *A 0.5,3.667 0.813,3.865 0.313,0.198 10 false *B 0.583,4.083 0.896,4.281 0.313,0.198 10 false *C 0.583,6.417 0.896,6.615 0.313,0.198 10 false *D
*A for TMMT Made *B w/o Wheel House Liner
*C LH Side *D RH Side


K159604C01
0.417,3.917 6.75,8.583 6.333,4.667 0.417,6.25 6.75,6.25 false 0.167,0.167 0.479,0.365 0.313,0.198 10 false *A 0.5,3.667 0.813,3.865 0.313,0.198 10 false *B 0.583,4.083 0.896,4.281 0.313,0.198 10 false *C 0.583,6.417 0.896,6.615 0.313,0.198 10 false *D
*A for TMMT Made *B w/ Wheel House Liner
*C LH Side *D RH Side