Home › Drivetrain › EC6A (MANUAL TRANSMISSION / TRANSAXLE) › MANUAL TRANSAXLE SYSTEM › 2016.10–2019.09
NM32H0E _52 Drivetrain _059729 EC6A MANUAL TRANSMISSION / TRANSAXLE _0292832 MANUAL TRANSAXLE SYSTEM CO CONTROL F

EC6A MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSAXLE SYSTEM  CONTROL  iMT SYSTEM  


FUNCTION OF MAIN COMPONENTS


Component Function
Fuel Injector Assembly Injects fuel to the combustion chamber in accordance with ECM signals.
Crank Position Sensor Detects the engine speed and performs cylinder identification.
Transmission Revolution Sensor Detects the input speed of the transmission.
Clutch Pedal Stroke Sensor Assembly Detects the amount of pedal effort applied to the clutch pedal.
Accelerator Pedal Position Sensor Detects the amount of pedal effort applied to the accelerator pedal.
iMT Switch (Pattern Select Switch Assembly) Switches the iMT system on/off.
ECM Controls the engine speed based on signals from each sensor and switch.
Combination Meter Assembly iMT indicator Displays the iMT indicator (green) when the system is in the standby condition.
Multi-information Display Displays the message when there is a malfunction in the system.
Brake Actuator Assembly Skid Control ECU Transmits the wheel speed signal to the ECM.


FUNCTION


a.

Shift Synchronization Function

i.

The iMT system detects shift changes from the driver (depressing the clutch pedal and operating the shift lever) and synchronizes the engine speed with the transmission input speed after a shift change, achieving a smooth and comfortable shift feeling.


ii.

This system operates when the iMT switch is operated and the iMT indicator (iMT system standby condition) is displayed in the combination meter.

1.

When Upshifting

- Control is performed so that the engine speed after a shift change does not drop below the transmission input speed and to reduce the shock caused when the clutch is engaged, achieving a smooth shift feeling.

X127042E02
2.771,0.417 2.771,0.177 2.771,0.177 3.219,0.177 true 3.292,0.031 4.125,0.74 0.833,0.708 10 false Transmission Input Speed 1.365,0.531 2.198,1.24 0.833,0.708 10 false Speed 1.021,2.083 1.854,2.792 0.833,0.708 10 false Acceleration 0.969,4.188 1.833,4.885 0.865,0.698 10 false Clutch Stroke 5.198,0.115 6.958,0.448 1.76,0.333 10 false : Engine speed (without iMT) 5.198,0.427 6.958,0.76 1.76,0.333 10 false : Engine speed (with iMT) 5.615,1.302 6.135,1.625 0.521,0.323 10 false Time 5.24,1.615 6.302,1.885 1.063,0.271 10 false : Without iMT 5.24,1.948 6.302,2.219 1.063,0.271 10 false : With iMT 5.573,2.719 6.635,2.99 1.063,0.271 10 false Time 5.573,3.615 6.635,3.885 1.063,0.271 10 false Time 5.573,4.646 6.635,4.917 1.063,0.271 10 false Time 0.969,3.208 1.802,3.917 0.833,0.708 10 false Shift Position 4.063,4.99 6.125,5.323 2.063,0.333 10 false Clutch Engagement Completed 3.615,5.365 5.677,5.698 2.063,0.333 10 false Clutch Engagement Starts 1.719,5.375 3.198,5.75 1.479,0.375 10 false Clutch Disengagement 2.74,5 3.156,5.271 0.417,0.271 10 false Shift 1.865,4.375 2.438,4.729 0.573,0.354 10 false Engaged 2.938,4.125 3.677,4.521 0.74,0.396 10 false Disengaged 4.198,4.375 4.938,4.771 0.74,0.396 10 false Engaged 2.24,3.375 2.813,3.729 0.573,0.354 10 false 2nd 2.979,3.208 3.552,3.563 0.573,0.354 10 false 3rd

2.

When Downshifting

- After a shift change, the engine speed is raised to synchronize with the transmission input speed, reducing the shock caused when the clutch is engaged and achieving a smooth shift feeling.

X127043E02
3.042,0.51 2.948,0.333 2.948,0.333 2.771,0.333 true 1.917,0.135 2.76,0.99 0.844,0.854 10 false Transmission Input Speed 5.229,0.677 7.052,1.042 1.823,0.365 10 false : Engine speed (without iMT) 5.229,1.052 7.052,1.417 1.823,0.365 10 false : Engine speed (with iMT) 5.563,1.458 6.042,1.667 0.479,0.208 10 false Time 5.24,1.854 6.208,2.073 0.969,0.219 10 false : Without iMT 5.25,2.24 6.219,2.458 0.969,0.219 10 false : With iMT 1.281,0.594 1.802,1 0.521,0.406 10 false Speed 0.958,2.052 1.75,2.531 0.792,0.479 10 false Acceleration 0.917,3.229 1.75,3.667 0.833,0.438 10 false Shift Position 0.917,4.24 1.781,4.698 0.865,0.458 10 false Clutch Stroke 5.594,2.969 6.563,3.188 0.969,0.219 10 false Time 5.604,3.74 6.573,3.958 0.969,0.219 10 false Time 5.604,4.646 6.573,4.865 0.969,0.219 10 false Time 2.26,3.438 2.594,3.771 0.333,0.333 10 false 3rd 3.188,3.583 3.521,3.917 0.333,0.333 10 false 2nd 2.646,4.094 3.49,4.375 0.844,0.281 10 false Disengaged 4.469,4.375 5.125,4.625 0.656,0.25 10 false Engaged 4.042,4.979 5.979,5.344 1.938,0.365 10 false Clutch Engagement Completed 3.458,5.406 5.406,5.708 1.948,0.302 10 false Clutch Engagement Starts 2.865,4.979 3.281,5.302 0.417,0.323 10 false Shift 1.729,5.406 3.188,5.76 1.458,0.354 10 false Clutch Disengagement 1.896,4.375 2.49,4.667 0.594,0.292 10 false Engaged




b.

Idle Take-off Assist Function

i.

The system detects the clutch engagement when starting to move, and adjusts the engine output (torque up) so that take-off can be performed more smoothly than it would be if it were performed with the clutch alone.




DIAGNOSIS


a.

When the ECM detects a malfunction, the ECM prohibits iMT system operation. In this case, in the combination meter displays the message.


b.

The ECM will also store the Diagnostic Trouble Codes (DTCs) of the malfunctions. The DTCs stored in the ECM are output to the Global TechStream (GTS) via the DLC3.


c.

For details, refer to the Repair Manual.