Home › Drivetrain › CLUTCH › CLUTCH SYSTEM
NM32H0E _52 Drivetrain _059758 CLUTCH _0292887 CLUTCH SYSTEM GE GENERAL F

CLUTCH  CLUTCH SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A dry type single plate clutch system which is operated by hydraulic pressure is used.


b.

The clutch system for the Manual Transaxle models uses the Concentric Slave Cylinder (CSC) in place of the clutch release cylinder.


c.

A clutch master cylinder assembly with clutch pedal stopper is used.


d.

The clutch start system is used to help enhance safety.

X135089



SPECIFICATION


Item Specification
Clutch Type Single Dry Plate Diaphragm
Operation Hydraulic
Clutch Cover Installed Load N 5450
Clutch Disc Facing Size* mm x mm (in. x in.) 224 x 150 (8.82 x 5.91)
Clutch Master Cylinder Type Plunger
Release Cylinder Type Concentric Slave Cylinder (CSC)
Clutch Pedal Turnover

*: Outer Diameter x Inner Diameter


MAIN FEATURES


a.

Clutch Master Cylinder Assembly with Stopper

i.

The clutch pedal stopper mechanism built into the clutch master cylinder assembly reduces stroke variation when assembling parts, realizing reduced free play and improved clutch feeling.



b.

Concentric Slave Cylinder (CSC) Type Clutch System

i.

Unlike a conventional clutch system, this system uses the CSC, in which the release cylinder and the release bearing are integrated, creating a structure where the diaphragm spring of the clutch cover is directly pressed, thereby discontinuing the release fork and the fork support, and this offers an excellent clutch operation feeling and weight reduction.


ii.

The clutch bleeder has been separated from the CSC in the front transaxle case and mounted on the transaxle. As a result, serviceability has been ensured.

X105132C01
4.688,1.438 4.854,0.448 4.854,0.448 5.052,0.448 true 5.76,2.104 5.375,2.104 true 2.594,0.313 2.792,0.313 2.792,0.313 2.99,0.667 true 3.917,3.198 3.74,3.198 3.74,3.198 3.594,3.615 true 4.667,4.365 4.813,3.406 4.813,3.406 5,3.406 true 5.792,5.042 5.344,5.042 true 2.927,3.208 3.094,3.208 3.094,3.208 3.229,3.833 true 2.792,2.552 2.792,2.177 true 2.854,5.469 2.854,5.031 true 1.698,4.885 2.698,4.885 2.698,4.885 2.719,4.771 true 1.708,4.167 2.771,4.167 true 2.781,5.51 3.063,5.719 0.281,0.208 10 *8 1.531,4.823 1.802,5.031 0.271,0.208 10 *7 1.51,4.115 1.792,4.323 0.281,0.208 10 *6 2.74,3.135 2.99,3.344 0.25,0.208 10 *5 2.729,2.594 3,2.833 0.271,0.24 10 *2 5.823,2.042 6.083,2.25 0.26,0.208 10 *4 5.125,0.375 5.417,0.583 0.292,0.208 10 *3 2.406,0.24 2.667,0.448 0.26,0.208 10 *1 5.865,4.979 6.104,5.188 0.24,0.208 10 *4 5.063,3.323 5.313,3.531 0.25,0.208 10 *3 3.969,3.125 4.229,3.333 0.26,0.208 10 *1 0.927,0.25 1.24,0.448 0.313,0.198 10 *A 0.896,3.094 1.208,3.292 0.313,0.198 10 *B
*A CSC Type Clutch System *B General Conventional Clutch System
*1 Clutch Release Bleeder Assembly *2 Concentric Slave Cylinder (Clutch Release with Bearing Cylinder Assembly)
*3 Clutch Master Cylinder Assembly *4 Clutch Pedal Sub-assembly
*5 Clutch Release Cylinder Assembly *6 Release Fork
*7 Fork Support *8 Release Bearing


NOTICE:
·

The CSC cannot be disassembled.

·

When the transaxle is removed from the engine, the piston and piston seal will move to the engine side and the piston seal may be damaged by foreign matter on the sliding surface. When the transaxle is removed from the engine, replace the CSC with a new one.

·

The bolts that fasten the CSC to the transaxle are seal bolts. When the bolts are removed, replace them with new ones.

·

The clutch fluid should be replaced or inspected according to the Maintenance Schedule and Owner's Manual.