Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENTRY AND START SYSTEM
NM32H0E _58 Vehicle Interior _060212 THEFT DETERRENT / KEYLESS ENTRY _0295302 ENTRY AND START SYSTEM DE DETAILS F

THEFT DETERRENT / KEYLESS ENTRY  ENTRY AND START SYSTEM  DETAILS  INDICATOR LIGHT/WARNING LIGHT/MULTI DISPLAY  


CONSTRUCTION


a.

Power Source Display

i.

When the certification ECU (smart key ECU assembly) detects an abnormality with the entry and start system, a message appears on the multi-information display. If the engine is stopped in this state, it might not be possible to restart it.

Y207758C01
3.854,3.802 4.365,4.438 4.365,4.438 4.531,4.438 true 4.563,4.344 4.875,4.5 0.313,0.156 10 false *1 1.26,1.042 1.573,1.198 0.313,0.156 10 false *a 3.5,1.042 3.813,1.198 0.313,0.156 10 false *b 5.677,1.031 5.99,1.188 0.313,0.156 10 false *c
*1 Multi-information Display - -
*a Power Source State (ACC) *b Power Source State (IG)
*c Key Warning Light - -


*: The engine is not started.

Displayed Item Power Source Condition
- Either of the following conditions is met:
·

The engine has started.

·

The power source is turned off.


ACCESSORY On (ACC) state
IGNITION ON On (IG) state (the engine is not started.)
Key Warning Light Engine start ready state*

HINT:

Engine start ready state is shown below.

·

For models with CVT, the shift lever is in P, the key certification result is OK and the brake pedal is depressed (the stop light switch assembly is on).

·

For models with manual transaxle, the key certification result is OK and the clutch pedal is depressed (the clutch start switch assembly is on).