Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM
NM32H0E _54 Brake _060230 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0295457 BRAKE CONTROL SYSTEM DE DETAILS F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  DETAILS  STEERING ANGLE SENSOR  


CONSTRUCTION


a.

The steering sensor detects the steering direction and angle, and sends this signal to the skid control ECU.


b.

The steering sensor contains 2 sets of magnetic reluctance elements that detect the rotational movement of a magnet that is built into the detection gear. Thus, the sensor detects the changes that occur in the magnetic reluctance elements along with the rotational movement of the detection gear, in order to detect the rotational movement of the steering wheel.

X116699C02
3.615,3.406 3.615,2.688 true 3.792,3.417 3.792,2.479 true 4.563,3.156 4.354,3.156 4.354,3.156 4.104,2.615 true 3.542,3.438 3.854,3.594 0.313,0.156 10 false *1 4.594,3.083 4.906,3.24 0.313,0.156 10 false *2 3.76,3.438 4.073,3.594 0.313,0.156 10 false *1
*1 Detection Gear *2 Steering Sensor
V100135

Front - -


NOTICE:

Do not remove the steering sensor from the spiral cable. If there is a malfunction in the steering sensor, replace the spiral cable with steering sensor.


HINT:

When removing and reinstalling the spiral cable with steering sensor, it is necessary to use a special procedure to prevent the center position of the steering sensor from becoming misaligned. For details, refer to the Repair Manual.